← Articles & insights

Practical SME guide

Best Strategic Consulting Firms for Manufacturers: What Should You Look For in a Manufacturing Business Advisor?

A practical guide to strategic consulting for manufacturing SMEs, covering profitability, Lean, Six Sigma, process improvement and choosing a manufacturing business advisor.

A manufacturing business can have a healthy order book, a functioning factory and a capable production team, yet still struggle to make the kind of money its turnover suggests it should.

Raw material costs keep changing. Machines are not always utilised efficiently. Rejections and rework consume time and money. Orders are delayed because one department is waiting for another. The owner spends more time resolving daily issues than planning the next stage of growth.

These are not necessarily production problems in isolation. They are business problems, and many of them are connected.

For a small or mid-sized manufacturer, improving output is only one part of the equation. The bigger question is whether the business is becoming more profitable, predictable and less dependent on the owner's constant involvement.

This is where strategic consulting for manufacturing SMEs becomes relevant.

The right advisor should be able to look beyond individual departments, understand how the business actually operates and identify what is preventing it from moving forward. At Small Business Advisor, our approach starts with that larger business picture.

Why manufacturing businesses need more than production improvements

Manufacturers often invest in machinery, technology, additional capacity and manpower when they want to grow. These investments can be necessary, but they do not automatically improve business performance.

Consider a factory that increases production capacity but continues to face delayed dispatches. The problem may not be the production line. It could be poor production planning, unreliable material availability, weak coordination between departments or an unrealistic commitment made by the sales team.

Similarly, a business may increase sales but see very little improvement in cash flow. That could point towards poor product costing, excessive credit periods, low-margin orders or inventory that is tying up working capital.

The important thing is to identify the actual constraint before investing in another solution.

A manufacturing business advisor should examine questions such as:

  • Are we earning enough margin from each product and customer?
  • Where are we losing productive time?
  • Why are production schedules frequently disrupted?
  • How much inventory is sitting unused?
  • Are quality problems being corrected at their source or repeatedly managed after they occur?
  • Can the business function effectively when the owner is not involved in every decision?
  • Is the current operating model capable of supporting the next stage of growth?

These questions connect production performance with profitability, management and strategy. Treating them separately can lead to improvements in one department without meaningful improvement in the overall business.

How Small Business Advisor approaches manufacturing consulting

We do not believe that every manufacturing business needs the same solution.

A company struggling with high rejection rates needs a different intervention from one facing low capacity utilisation. A family-owned factory preparing for its next generation may need stronger management systems, while a growing manufacturer may need to rethink its costing, sales and production planning.

The starting point is understanding the business as it stands today.

This involves examining its financial performance, operating processes, organisational structure, management practices and growth objectives. We look at what is happening, why it is happening and what needs to change.

The objective is not to introduce a collection of management tools. It is to use the right tools to address the business's actual constraints and make improvements that can be sustained by the organisation.

Improving manufacturing performance starts on the shop floor

A management report may show that production costs are increasing or delivery performance is declining. But it rarely tells the complete story.

To understand the reasons, it is important to examine how work moves through the factory.

Lean Manufacturing: identifying what does not add value

Lean Manufacturing focuses on improving the flow of work by identifying activities that consume resources without adding value from the customer's perspective.

In a manufacturing environment, this may include unnecessary movement of materials, excessive waiting, avoidable transportation, repeated handling, excess inventory and defects.

The objective is not simply to reduce manpower or cut expenses. It is to improve how resources are used.

For example, if a component moves between multiple workstations before reaching the next stage, it is worth examining whether the layout, process sequence or material handling arrangement can be improved.

Small changes in the way work is organised can reduce delays and improve productivity without necessarily requiring major capital expenditure.

The 7 Muda and the 8th waste

The Lean framework traditionally identifies seven forms of waste, commonly referred to as the 7 Muda:

1. Overproduction
2. Waiting
3. Transportation
4. Over-processing
5. Excess inventory
6. Unnecessary motion
7. Defects

Many modern Lean frameworks also include an eighth waste: underutilisation of people's skills and capabilities.

Overproduction deserves particular attention. Producing more than the immediate requirement may appear to keep machines busy, but it can create excess inventory, increase storage costs and block working capital.

A factory should not measure efficiency only by how continuously its machines are running. Production must be aligned with actual demand and business priorities.

Gemba Walk: understanding what actually happens

Gemba means the actual place where work happens. In manufacturing, a Gemba Walk involves observing the production process where the work is being performed.

Rather than relying entirely on reports or explanations, management visits the shop floor, observes activities and speaks with employees to understand the process.

A Gemba Walk can reveal issues that may not appear in a monthly review:

  • Materials arriving late at workstations
  • Employees waiting for instructions or approvals
  • Machines frequently stopping for minor reasons
  • Repeated movement of work-in-progress
  • Quality checks happening too late
  • Operators following different methods for the same task

The value of a Gemba Walk lies in understanding the process before deciding what needs to change.

5S: creating a more organised workplace

5S is a workplace organisation method built around five Japanese terms:

  • Sort: Remove items that are not required.
  • Set in Order: Give necessary tools and materials a defined place.
  • Shine: Keep the workplace clean and inspect equipment regularly.
  • Standardise: Establish consistent practices.
  • Sustain: Make these practices part of everyday work.

A factory does not become efficient simply because it looks organised. However, a well-implemented 5S system can reduce time wasted searching for tools, improve workplace discipline and make abnormalities easier to identify.

The challenge is sustaining the practice after the initial implementation. That requires ownership, regular checks and management involvement.

Just-in-Time Manufacturing: controlling inventory without disrupting production

Just-in-Time (JIT) aims to make or receive materials in line with actual production requirements rather than holding unnecessary quantities of stock.

For a manufacturer, excessive inventory can consume significant working capital. However, reducing inventory without improving planning and supplier reliability can create a different problem: production stoppages.

JIT should therefore be introduced only after examining supplier performance, demand patterns, production schedules, lead times and material availability.

The aim is not to keep the lowest possible stock at any cost. It is to maintain the right materials at the right time without carrying unnecessary inventory.

Finding the actual reason behind recurring manufacturing problems

Many factories become accustomed to managing the same problems repeatedly.

A machine breakdown is followed by a repair. A quality rejection is followed by rework. A delayed order is followed by overtime. The immediate issue gets resolved, but the underlying reason remains.

Over time, this becomes expensive.

A structured problem-solving approach helps management move from treating symptoms to addressing causes.

5 Why Analysis: going beyond the obvious explanation

The 5 Why Analysis involves asking why a problem occurred repeatedly until the underlying cause becomes clearer.

For example:

Problem: Customer orders are being dispatched late.

  • Why? Production is frequently delayed.
  • Why? Required material is not available on time.
  • Why? Material procurement begins too late.
  • Why? Purchase planning is not linked properly to the production schedule.
  • Why? There is no consistent planning and review process connecting sales, stores, purchasing and production.

The first explanation might suggest that purchasing is inefficient. Further investigation may reveal that the actual issue is the absence of an integrated planning process.

The method is simple, but it requires evidence and involvement from the people who understand the process. Five questions should not be treated as a fixed number or a substitute for proper investigation.

DMAIC and DMADV: structured approaches to improvement

Two commonly used Six Sigma methodologies are DMAIC and DMADV.

DMAIC stands for Define, Measure, Analyse, Improve and Control. It is used when an existing process needs to be improved.

For example, a manufacturer experiencing a high rejection rate can define the problem, measure current defects, analyse their causes, introduce improvements and establish controls to prevent the problem from returning.

DMADV stands for Define, Measure, Analyse, Design and Verify. It is used when designing a new process or fundamentally redesigning an existing one.

The distinction matters. If an existing production process is underperforming, improving it may be more appropriate than redesigning the entire system. If the existing process cannot meet the required performance even after improvement, a new design may be necessary.

Sigma Level Calculation: measuring process performance

Manufacturers need reliable ways to measure process quality.

Sigma level calculation uses defect data and opportunities for defects to assess process performance. It helps management understand how consistently a process is meeting its requirements.

The calculation is only useful when the underlying data is reliable. A business should first define what counts as a defect, what constitutes an opportunity for a defect and how the data is collected.

A number on a quality report is not an improvement by itself. The real value comes from using the measurement to identify where the process is failing and what action is required.

Business Process Engineering: connecting departments instead of fixing them in isolation

In many small manufacturing companies, departments work hard but do not always work together.

Sales commits to a delivery date without checking production capacity. Purchasing orders materials without an accurate production plan. Production completes an order, but quality inspection or dispatch documentation delays the shipment.

Each department may believe it is doing its job correctly. The customer still receives the order late.

Business Process Engineering looks at how work moves across the organisation, from the initial customer requirement to final delivery and payment.

The focus is on removing unnecessary steps, clarifying responsibilities, improving information flow and establishing processes that people can follow consistently.

SIPOC: understanding the process from beginning to end

SIPOC stands for Suppliers, Inputs, Process, Outputs and Customers.

It provides a high-level view of a process and helps teams understand what goes into it, what happens during the process and what the final output should be.

For example, in an order-to-delivery process:

  • Suppliers: Customers, vendors and internal departments providing information or materials.
  • Inputs: Customer orders, specifications, raw materials and production capacity.
  • Process: Order review, planning, procurement, production, quality inspection and dispatch.
  • Outputs: Finished products and delivery documentation.
  • Customers: The buyer receiving the product or service.

SIPOC helps establish a common understanding before a detailed process improvement exercise begins.

For a growing manufacturer, this can be particularly useful when responsibilities are unclear or different departments are working with different assumptions.

Voice of the Customer: are you producing what customers actually value?

Manufacturers often focus heavily on internal production targets. But the customer judges the business on what is delivered, how consistently it is delivered and whether the product meets expectations.

Voice of the Customer (VoC) is the process of understanding customer requirements, expectations and concerns.

These requirements can then be translated into measurable product or service characteristics through CTQ, or Critical to Quality, parameters.

For example, a customer purchasing an industrial component may care about:

  • Dimensional accuracy
  • Product durability
  • Consistent quality
  • Delivery timelines
  • Packaging standards
  • Traceability and documentation

These requirements should not remain as general statements. They need to be converted into measurable specifications that production and quality teams can work with.

A manufacturer may believe that its product quality is excellent, but if the customer's critical requirement is delivery consistency, improving product specifications alone will not solve the problem.

The cost of quality: what are defects really costing your business?

Quality problems are often measured through rejection percentages. That is only part of the picture.

The broader Cost of Quality (COQ) framework considers the costs associated with preventing defects, checking quality and dealing with failures.

These costs are generally grouped into:

  • Prevention costs: Training, process planning and activities intended to prevent quality problems.
  • Appraisal costs: Inspection, testing and quality checks.
  • Internal failure costs: Scrap, rework and production losses identified before delivery.
  • External failure costs: Customer returns, warranty claims, complaints and other failures identified after delivery.

Cost of Poor Quality (COPQ) focuses specifically on the costs resulting from poor quality and failures.

For example, a rejected batch does not only cost the business the material used. It may also involve machine time, labour, rework, delayed dispatch, additional transportation and customer dissatisfaction.

When these costs are calculated properly, management can make better decisions about where quality improvements will have the greatest financial impact.

What makes Small Business Advisor relevant to manufacturing SMEs?

Manufacturing businesses do not always need another person telling them to improve productivity, reduce costs or increase sales. Most owners already know these are important.

What they need is someone who can help them understand why the business is not achieving the expected results and what needs to change.

Small Business Advisor works with Indian SMEs, family businesses and manufacturers on business strategy, operations, profitability, management systems and organisational development.

Rajiv has more than 25 years of advisory experience, with over 1,100 businesses advised and more than 300 consulting projects. His work has involved businesses across manufacturing, trading and family-owned enterprises, including businesses in India and international markets.

The advisory approach is senior-led. It combines business diagnosis with practical work across strategy, operations, finance, sales architecture and organisational design.

Experience that goes beyond theoretical recommendations

One example is the journey of Italica Group of Companies.

The business expanded from one manufacturing unit to four, while turnover grew from approximately ₹60 crore to ₹550 crore.

Its Managing Director, Shailesh Vasnani, described Possible Group's contribution as a catalyst in helping the business multiply its operations and grow its turnover.

This is an individual client outcome, not a promise of what every manufacturer should expect. Every business has a different starting point, market, management team and set of constraints.

The important point is that manufacturing growth needs more than additional capacity. It requires the business to develop the strategy, systems and management capabilities to support that growth.

Small Business Advisor also draws on manufacturing advisory experience across different markets. For example, an industrial components manufacturer in Oman was operating at approximately 60% capacity. The engagement focused on restructuring the sales pipeline, identifying underserved B2B segments and strengthening the operational processes needed to absorb higher volumes without adding proportionate overhead.

The specific intervention depends on the business. The starting point is always understanding the problem rather than assuming that one standard solution will work everywhere.

When should a manufacturer consider strategic consulting?

There is no single turnover level at which a manufacturing business suddenly needs an advisor.

However, there are certain signs that indicate the business may have outgrown its current way of operating.

You may need external advisory support when:

  • Revenue is growing, but profitability is not improving at the same rate.
  • The owner is still involved in routine production and operational decisions.
  • The business faces repeated delays, rework or quality issues.
  • Inventory and receivables are putting pressure on working capital.
  • Departments are working independently without clear accountability.
  • New machinery or capacity is being considered, but existing resources are not being fully utilised.
  • The next generation is entering the business and management responsibilities need to be clarified.
  • Growth has plateaued and the leadership team cannot identify the main reason.

These are not problems that can always be solved by introducing a new software system, hiring another manager or conducting a one-time training programme.

Sometimes the issue is the strategy. Sometimes it is the way processes are designed. In other cases, the business has outgrown its existing management structure.

The first step is finding out which of these is actually happening.

How does a manufacturing advisory engagement begin?

An advisory engagement should not begin with a predetermined list of solutions.

It should begin with a discussion about the business, its current challenges and what the owner wants to achieve.

The initial diagnostic helps establish the areas that need attention. Depending on the business, this may involve reviewing financial performance, product and customer profitability, production processes, organisational responsibilities, sales performance and management systems.

Once the key constraints are understood, priorities can be established.

Some businesses may need to address costing and margins first. Others may need to improve production planning, inventory management or accountability across departments. A business preparing for expansion may need a broader strategy covering capacity, people, systems and market opportunities.

The objective is to focus on the changes that matter most, rather than trying to implement every available management methodology.

Choosing the right strategic consulting partner for your manufacturing business

When evaluating strategic consulting firms for manufacturers, do not judge a firm only by its presentation, list of methodologies or the number of recommendations in its proposal.

Ask whether the advisor understands the realities of manufacturing. Can they connect operational problems with financial performance? Do they understand how departments affect one another? Can they distinguish between a symptom and the underlying cause? And, most importantly, will they help the business move from recommendations to implementation?

A manufacturer needs advice that makes sense in the context of its people, processes, customers and financial position.

At Small Business Advisor, the emphasis is on understanding the business before recommending a course of action. The aim is to help owners build a business that is more profitable, better organised and capable of growing without depending on the owner for every decision.

If your manufacturing business has reached a stage where working harder is no longer producing the expected results, it may be time to examine how the business itself is operating.

Speak with Small Business Advisor about the challenges in your manufacturing business. The first conversation is an opportunity to discuss where the business stands, what is holding it back and whether an advisory engagement can help.

Get in touch: https://small-business-advisor.com/

---

Frequently Asked Questions

A strategic consultant helps a manufacturing business identify the issues affecting its performance and determine what needs to change. This can include business strategy, profitability, production planning, process improvement, organisational structure, management systems and growth planning.

Why do small and mid-sized manufacturers need business advisory services?

Small and mid-sized manufacturers often operate with limited management bandwidth and depend heavily on the owner for important decisions. Business advisory services can help identify operational inefficiencies, improve profitability, establish management systems and prepare the business for growth.

What is the difference between manufacturing consulting and production consulting?

Production consulting generally focuses on improving manufacturing activities such as output, quality, machine utilisation and production efficiency. Manufacturing business consulting takes a wider view, connecting production performance with profitability, sales, finance, people, management systems and business strategy.

How can Lean Manufacturing improve profitability?

Lean Manufacturing helps identify and reduce activities that do not add value, such as unnecessary movement, waiting, excess inventory, overproduction and defects. Reducing these forms of waste can improve productivity, shorten lead times and reduce avoidable operating costs.

What is the role of Six Sigma in manufacturing?

Six Sigma uses data-driven methods to reduce process variation and defects. Methodologies such as DMAIC help businesses measure existing process performance, identify causes of problems, implement improvements and establish controls to sustain results.

When should a manufacturing company hire a business consultant?

A manufacturing company should consider an advisor when it faces recurring operational problems, declining margins, poor capacity utilisation, delayed orders, excessive inventory, weak management systems or stalled growth. It is often better to address these issues before they become major financial or operational crises.

How do I choose the right manufacturing business consultant in India?

Look for an advisor with relevant experience in manufacturing and SME businesses. Evaluate their ability to understand operational and financial issues together, diagnose root causes, work with the management team and support implementation. Ask for relevant examples and clarity on how progress will be measured.

Does Small Business Advisor work with family-owned manufacturing businesses?

Yes. Small Business Advisor works with family businesses and manufacturers on business strategy, operations, management systems, governance and succession-related challenges. The approach considers both the commercial requirements of the business and the realities of family ownership.

Make your next business decision with clarity.

Discuss your business goals and challenges with Small Business Advisor.

Discuss your manufacturing business ↗